The ozone system consists of a high efficiency, air-cooled, corona discharge ozone generator with internal oxygen concentrator/compressor. The mass transfer system is designed for maximum efficiency. This includes an injector, contactor, and degassing separator. An off-gas destruct unit is included to capture any ozone not dissolved into water. If needed an optional booster pump can deliver ozone-laden water up to several hundred feet away from the generation point.
The instrumentation package includes a dissolved ozone residual analyzer, 4-20 mAmps controller, pressure gauges and indicator lights. The purpose of the residual analyzer is to continuously monitor the level of residual ozone at the water outlet. Through the controller, this signal is used to increase or decrease the output of the ozone generator at the selected level (set point). An optional ambient ozone detector is also available to monitor plant air levels.
|DESCRIPTION||15 GPM (@ up to 3 ppm O3) 15 grams/hr||30 GPM (@ up to 3 ppm O3) 30 grams/hr||30 GPM (@ up to 3 ppm O3) 60 grams/hr|
|VOLTAGE||120V 1PH 18A*||120V 1PH 18A*||120V 1PH 18A*|
|DIMENSIONS||25″ W x 25″ D x 72″ H||25″ W x 25″ D x 72″ H||30″ W x 25″ D x 72″ H|
|WEIGHT||320 lbs.||480 pounds||500 pounds|
|ELECTRICAL||120VAC, 1 phase, 60 Hz 18 A*||120VAC, 1 phase, 60 Hz 18 A*||120VAC, 1 phase, 60 Hz 20 A*|
|CONNECTIONS:Water inlet||1 ½” Sanitary||1 ½” Sanitary||1 ½” Sanitary|
|OZONATED Water Outlet||1 ½” Sanitary||1 ½” Sanitary||1 ½” Sanitary|
|OZONATED Water Return||1 ½” Sanitary||1 ½” Sanitary||1 ½” Sanitary|
|MATERIALS||304 Stainless Steel/ 316L Piping||304 Stainless Steel/ 316L Piping||304 Stainless Steel/ 316L Piping|
|MAXIMUM FLOW RATE||15 gpm||30 gpm||30 gpm|
|OZONE OUTPUT||15 grams/hr||30 grams/hr||60 grams/hr|
|*Different electrical requirements available|
|**Larger and customized units available|